Combined a large touchscreen and control buttons, TS8ABH is also equipped with 4 outputs in isolated AB channels. Feel the 100% powerful relief on multi-areas at the same time! Lock function available.
Effective Pain Relief
Fast block the transmission of pain signal. Safe and comfortable to use. Intensity adjustable.
Isolated AB Channels
Separate your mode and intensity settings in channel A and Channel B to target different pain areas.
Relieve 4 Painful Areas Simultaneously
4 outputs allow 8 pads to be applied to 4 different targeted areas at the same time.
Lock function to prevent any incautious clicks. Nothing can bother you while enjoying the powerful relief from TS8ABH.
Easy to Read and Control Touch Screen
Easy to navigate with the combination of large touchscreen, clear icons, and quick access to physical buttons.
minute adjustable timer
levels of adjustable intensity
isolated outputs in channel A1/A2 and B1/B2, both have 100% power
Rechargeable internal lithium battery
Adjustable mode and intensity in channel A or channel B
Pause Button - Pause and Restart at anytime
Allow 8 pads to be applied to 4 different areas at the same time
Specially designed safety lock button to prevent any incautious clicks
Tuina (Push and Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, Body Building, Body Building 2, and Combination
What's in the box
1 FDA cleared Class II OTC HealthmateForever TS8ABH TENS & Muscle Stimulator
8 piece self-adhesive conductive reusable gel pads
4 sets of electrode wires (2.5mm plug)
1 USB Charger/Wall Unit (international travel charger 110V - 240V)
2 Pads Holders
1 stylus pen
Output pulse width: 90μS ± 15%
Pulse Frequency: <100HZ
Max output amplitude: <5v (r.m.s)
Screen size: 4" W x 2.4" L
Size: 4.5" L x 2.6" W x .4" T
Weight: 4.3 oz
Patent Number: US D758, 605S
For User Manual, please email us at firstname.lastname@example.org.
Connect electrode wires with control unit.
1. Plug the electrode wire into the device.
2. Ensure that the electrode wires are fully inserted and secured.
3. Repeat steps 1 & 2 to connect another wire.
Connect electrode pads with wires.
1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
2. Make sure at least one pair of pads is attached to the same wire.
3. Ensure that the snap on connections are fastened.
4. Remove the plastic films on the pads.
Place pads on your body.
Turn on the control unit.
Turn off the device.
Remove the pads from your skin.
Take off the pads from wires. Unplug wires from device.