With extra-large icon and easy to control touch screen, TS10ABH is very friendly to senior users and new users. 4 outputs with 2 isolated channels A/B allow 8 pads to be applied to 4 different painful areas.
Isolated AB Channels
Separate your mode and intensity settings in channel A and Channel B to target different pain areas.
Large Touch Screen
Easy to navigate with the combination of large touchscreen, clear icons, and quick access to physical buttons.
Safe Pain Management
Interrupts pain signals from reaching the brain. Non- Invasive, All- Natural and Drug-free.
4 outputs provide strong relief power. 20 levels of intensity for your choices.
High-Quality Self-adhesive Pads
Our reusable TENS electrode pads are made of breathable non-woven fabric and durable pre-gel. Soft and flexible for joints, stay attached for long-term use.
minute adjustable timer
levels of adjustable intensity
isolated outputs in channel A1,A2 and B1/B2, both have 100% power
Rechargeable internal lithium battery
Adjustable mode and intensity in channel A or channel B
Pause Button - Pause and Restart at anytime
Specially designed safety lock button to prevent any incautious clicks
Allow 8 pads to be applied to 4 different areas at the same time
Tuina (Push and Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, Shiatsu, Pressure, Body Building, Body Building2, and Combination
What's in the box
1 FDA cleared Class II OTC HealthmateForever TS10ABH TENS & Muscle Stimulator
8 piece self-adhesive conductive reusable gel pads
4 sets of electrode wires (2.5mm plug)
1 USB Charger/Wall Unit (international travel charger 110V - 240V)
2 Pads Holders
1 stylus pen
Output pulse width: 90μS ± 15%
Pulse Frequency: <100HZ
Max output amplitude: <5v (r.m.s)
Screen size: 4" L x 2.4" W
Size: 4.5" L x 2.6" W x 0.4" T
Weight: 4.3 oz
Patent Number: US D758, 605S
For User Manual, please email us at email@example.com.
Connect electrode wires with control unit.
1. Plug the electrode wire into the device.
2. Ensure that the electrode wires are fully inserted and secured.
3. Repeat steps 1 & 2 to connect another wire.
Connect electrode pads with wires.
1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
2. Make sure at least one pair of pads is attached to the same wire.
3. Ensure that the snap on connections are fastened.
4. Remove the plastic films on the pads.
Place pads on your body.
Turn on the control unit.
Turn off the device.
Remove the pads from your skin.
Take off the pads from wires. Unplug wires from device.