888-860-7788
Have different needs in different pain areas? NK10AB let you customize the intensity level for each pain point. Pack it in your carry-on on a trip and relieve wherever you are and charge it using your laptop.
Fast Pain Relief & Muscle Recovery
Pre-programmed 10 massage-like modes relieve your pain areas and soreness muscles effectively.
Separate Intensity Settings
Set different intensity levels in A/B channels to target different needs in two painful areas.
Travel-Friendly
Carry it wherever you need it. Put it in your pocket or hide it under your clothes. Take it on a getaway, a flight or a road trip.
USB Rechargeable
Easy to charge with your computer, laptop or regular adapter to never let "out of battery" stop your pain relief.
High-Quality Self-adhesive Pads
Our reusable TENS electrode pads are made of breathable non-woven fabric and durable pre-gel. Soft and flexible for joints, stay attached for long-term use.
10
massage-Like modes
10-60
minute adjustable timer
20
levels of adjustable intensity
2
isolated outputs in channel A/B, both have 100% power
Rechargeable internal lithium battery
Adjustable intensity in channel A or channel B
Easy to read animated backlit LCD Display
Wireless Pad feature compatible with WI9
Pause Button - Pause and Restart at anytime
Mode list
Tuina (Push & Pull), Acupuncture, Tapping, Guasha (Scraping), Leg, Cupping, Body Building, Body Building 2, Foot, and Combination
What's in the box
1 FDA cleared Class II OTC HealthmateForever NK10AB TENS & Muscle Stimulator
4 piece self-adhesive conductive reusable gel pads
2 sets of electrode wires (3.5mm plug)
1 USB Charger/Wall Unit (international travel charger 110V - 240V)
User Manual
Warranty Card
1 Pads Holder
Tech specs
Output pulse width: 90μS ± 15%
Pulse Frequency: <100HZ
Max output amplitude: <5v (r.m.s)
3.5mm Plug
Screen size: 1.5" L x 1.25" W
Size: 1.5" L x 3" W x .5" T
Weight: 1.3 oz
For User Manual, please email us at support@healthmateforever.com.
Step 1:
Connect electrode wires with control unit.
2. Ensure that the electrode wires are fully inserted and secured.
3. Repeat steps 1 & 2 to connect another wire.
Step 2:
Connect electrode pads with wires.
1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
2. Make sure at least one pair of pads is attached to the same wire.
3. Ensure that the snap on connections are fastened.
4. Remove the plastic films on the pads.
Step 3:
Place pads on your body.
Step 4:
Turn on the control unit.
Step 5:
Select modes.
Step 6:
Adjust timer.
Step 7:
Select intensity.
Step 8:
Turn off the device.
Step 9:
Remove the pads from your skin.
Step 10:
Take off the pads from wires. Unplug wires from device.