Manage your joint pain now with the powerful TS10AB. It blocks your pain signal quickly by sending small electrical impulses to your nerve fibers via isolated AB channels.
Isolated AB Channels
Customize your own pain relief mode and intensity in A/B channels to relax multiple pain areas at the same time!
User-Friendly Touch Screen
Big and clear designed animated mode icons combined with channel/intensity buttons make your pain relief selection easy and accurate.
Improve Muscle Performance
Facilitate high muscle performance while enjoying the relaxing massage-like stimulation.
Equipped with a rechargeable battery, up to 10 hours of continuous use. USB charging enabled.
Powerful Point Pain Relief
Pre-programmed 10 pain relief modes simulate real massage feeling such as Cupping and Tuina to provide fast and strong relief to joint pain.
minute adjustable timer
levels of adjustable intensity
isolated outputs in channel A/B, both have 100% power
Rechargeable internal lithium battery - up to 10 hours of continuous use
Adjustable mode and intensity in channel A or channel B
Easy to read animated backlit LCD Display
Pause Button – Pause and Restart at anytime
Tuina (Push and Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, Shiatsu, Pressure, Body Building, Body Building2, and Combination
What's in the box
1 FDA cleared Class II OTC HealthmateForever TS10AB TENS & Muscle Stimulator
4 piece self-adhesive conductive reusable gel pads
2 sets of electrode wires (3.5mm plug)
1 USB Charger/Wall Unit (international travel charger 110V - 240V)
2 Pads Holders
1 stylus pen
Output pulse width: 90μS ± 15%
Pulse Frequency: <100HZ
Max output amplitude: <5v (r.m.s)
Screen size: 1.7" W x 2.6" L
Size: 4" L x 2" W x .5" T
Weight: 5.5 oz
For User Manual, please email us at firstname.lastname@example.org.
Connect electrode wires with control unit.
1. Plug the electrode wire into the device.
2. Ensure that the electrode wires are fully inserted and secured.
3. Repeat steps 1 & 2 to connect another wire.
Connect electrode pads with wires.
1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
2. Make sure at least one pair of pads is attached to the same wire.
3. Ensure that the snap on connections are fastened.
4. Remove the plastic films on the pads.
Place pads on your body.
Turn on the control unit.
Turn off the device.
Remove the pads from your skin.
Take off the pads from wires. Unplug wires from device.