888-860-7788
Equipped with an easy to use the touchscreen and isolated AB channels for separate mode and intensity settings. TS6AB gives you extra value more than an essential pain & muscle soreness relief device.
Isolated AB Channels
Separate your mode and intensity settings in channel A and Channel B to target different pain areas.
Essential Relief
Pre-programmed 6 Massage-Like Methods, each with 20 levels of intensity to provide customized and drug-free relief of various pains.
Slim & Portable
A slim and sleek body design that fits in your pocket perfectly. Relieve anywhere, anytime you want.
Long-Lasting Battery
Equipped with a rechargeable battery, up to 10 hours of continuous use. USB charging enabled.
Beginner Friendly
Never used a TENS & PMS Device before? No worries! Select key functions with simple mode & intensity controls. Touchscreen make things even easier! Begin your relief with just a few touches!
6
massage-Like modes
10-80
minute adjustable timer
20
levels of adjustable intensity
2
isolated outputs in channel A/B, both have 100% power
Rechargeable internal lithium battery - up to 10 hours of continuous use
Adjustable mode and intensity in channel A or channel B
Easy to read animated backlit LCD Display
Pause Button – Pause and Restart at anytime
Mode list
Tuina (Push and Pull), Acupuncture, Tapping, Guasha (Scraping), Cupping, and Combination
What's in the box
1 FDA cleared Class II OTC HealthmateForever TS6AB TENS & Muscle Stimulator
4 piece self-adhesive conductive reusable gel pads
2 sets of electrode wires (3.5mm plug)
1 USB Charger/Wall Unit (international travel charger 110V - 240V)
User Manual
Warranty Card
2 Pads Holders
1 stylus pen
Tech specs
Output pulse width: 90μS ± 15%
Pulse Frequency: <100HZ
Max output amplitude: <5v (r.m.s)
3.5mm Plug
Screen size: 1.7" W x 2.6" L
Size: 4" L x 2" W x .5" T
Weight: 5.4 oz
For User Manual, please email us at support@healthmateforever.com.
Step 1:
Connect electrode wires with control unit.
1. Plug the electrode wire into the device.
2. Ensure that the electrode wires are fully inserted and secured.
3. Repeat steps 1 & 2 to connect another wire.
Step 2:
Connect electrode pads with wires.
1. Each wire has two leads with snap-on connectors. Snap the wire connectors onto the snap on buttons on the pads.
2. Make sure at least one pair of pads is attached to the same wire.
3. Ensure that the snap on connections are fastened.
4. Remove the plastic films on the pads.
Step 3:
Place pads on your body.
Step 4:
Turn on the control unit.
Step 5:
Select modes.
Step 6:
Adjust timer.
Step 7:
Adjust intensity
Step 8:
Turn off the device.
Step 9:
Remove the pads from your skin.
Step 10:
Take off the pads from wires. Unplug wires from device.