YK15AB Best TENS unit Electronic Pulse Massager | HealthmateForever

Scratch & Dent YK15AB TENS Unit & Muscle Stimulator

  • $ 20.00

  • 1 FDA cleared Class II OTC HealthmateForever YK15AB electroTherapy device (combined TENS unit and Muscle Stimulator)
  • 8 piece self-adhesive conductive reusable electrode pads with inserted pin
  • 4 sets of inserted pin electrode wires (3.5mm plug)
  • 1 Pads holder
  • Warranty Card
  • User Manual
  • VIP card
  • 3 AAA batteries

If any questions or concern please feel free to contact us.

  • 15 preprogrammed electronic pulse massager massage modes:
  • 9 custom designed modes: Neck, Shoulder, Back, Elbow, Hip, Ankle, Knee, Foot/hand, And Wrist; 
  • 6 therapeutic methods: Knead, Acupuncture, Tapping, Cupping, Scraping, and Random.
  • Default timer: 80 minutes. When time is due, it is automatically shut off.
  • 20 levels of adjustable intensity in either channel A1, A2 or channel B1, B2. You can treat two different areas with different intensity at the same time
  • Speed+ button increases frequency of mode 
  • Speed- button decreases frequency of mode
  • 4 outputs design with 2 independent channels A1, A2 and B1, B2.
  • Allows 8 pads to be used at the same time
  • Your electronic pulse massager uses 3 AAA batteries
  • Easy to read animated back-lit LCD Display
  • YK15AB Belt ClipBelt Clip
  • If any questions or concern please feel free to contact us.

Electronic pulse massager Output Parameters:

  • Output pulse width: 90 μS ± 15%
  • Pulse Frequency: <100 HZ
  • Max output amplitude:  <5v (r.m.s)
  • Electrode wire plug diameter 3.5 mm

Input Parameters:

  • Input voltage: DC 4.5 V
  • Rated current:   ≤ 50 mA
  • Rated power:  0.225 W 
  • Temperature range: 0°C to 48°C
  • Humidity: 10% to 85%
  • Atmospheric Pressure: 400 hPa to 1060 hPa
  • Screen size: 1.75" W x 1" L
  • Size: 7.75" L x 2.75" W x .75" T
  • Weight: 4.2 oz
  • Patent Number: US D723, 178S

If any questions or concern please feel free to contact us.

Step 1: Set up batteries.

    1. Check if the batteries are in good condition
    2. Remove the battery cover on the back of device
    3. Insert batteries. Make sure the “+” “-” sides correspond
    4. Put the battery cover back.

    Step 2: Connect electrode wires with the device.

    YK15AB has two independent channels A&B and 4 outputs A1, A2, B1, and B2. Make sure which channels (channel A or B) you want to use before you connect wires to the device.

    If you want to use channel A only, please connect wire to outputs A1 A2.

    If you want to use channel B only, please connect wire to outputs B1 B2.

    If you would like to use both A and B channels, please connect wires to all outputs.

      1. Plug the electrode wire into the output located at the top of the device. Depending on your needs, you may use up to four outputs.
      2. Ensure that the electrode wires are fully inserted and secured.
      3. Repeat steps 1 & 2 to connect another wire.

      Step 3: Connect electrode pads with wires.

        1. Each wire has two leads with pin-inserted connectors. Plug the pin-insert wire connectors into pin-insert pads.
        2. Make sure at least one pair of pads are attached to the same wire.
        3. Ensure that the pin-insert connections are fastened.
        4. Remove the plastic films on the pads.

        Step 4: Place pads on your body.

        Place pads on the area you would like to treat. Place the adhesive side of pad on your skin.

        Step 5: Turn on the control unit and select channel.

        Push the “ON/OFF” switch located on the right side of the device to the ON position.        

        The device will start showing all icons for 2 seconds to ensure that all icons are displayed properly.   

        Verify the channel indicator on the screen to make sure the device is on the same channel you want. If the “A” on the screen is blinking, the channel A is working. If “B” is blinking, channel B is working. If you plug wire into A (B) output, you have to use A (B) channel.

        Step 6: Select modes.

        Select any mode you want to use and press the button. For example, if you would like to use “BACK” mode, you need to press the button “BACK” on the device.

        Step 7: Adjust intensity and speed.

        YK15AB has A/B independent channels. The intensity can be adjusted independently for A and B channels. There are “Intensity +” “Intensity -” buttons on both left side and right side of device.

        Please use “Intensity +” “Intensity -” buttons on left side to adjust intensity for channels A (A1 A2 outputs).

        Please use “Intensity +” “Intensity -” buttons on right side to adjust intensity for channel B (B1 B2 outputs).

        Press intensity “+” button to increase the intensity, press intensity “-” button to decrease the intensity.

        If you need to adjust speed of electronic pulse, press speed “+” button to increase the speed, press Speed “-” button to decrease the speed. 

        Step 8: Adjust timer.

        This model has default 80-minutes timer.

        Step 9: Turn off the device.

        Push the “ON/OFF” switch located at the right side of the device to the OFF position.

        Step 10: Remove the pads from your skin.

        Remove the pads from your skin softly and place them back on the provided pad holder or the protective plastic film.

        DO NOT remove the pads before you turn off the device.

        Step 11: Take off the pads from wires. Unplug wires from device.